Ag Products - page 4 page 1 page 2 page 3

FOR FAST, "INSPECTOR-ACCURATE" TEST RESULTS ANYWHERE

MOTOMCO MODEL 919® MOISTURE METER AND SCOUT® ELECTRONIC WEIGH SCALE

You cannot buy a more accurate grain moisture testing system.

  • Used by a majority of grain elevators
  • Lightweight and portable
  • Precision drum dial with large, easy-grip controls
  • Calibration charts prepared by USDA Labs
  • Battery models available on special order

Package includes the Scout Electronic weighing Scale!

  • Large, high contrast LCD display
  • Simple two-button operation
  • Large, stainless steel weighing surface
  • Integral security bracket and user-enabled auto shut-off
  • Comes complete with a stability indicator, error indicator for over/under loads, low battery indicator, and a weigh below hook

Designed specifically to meet the needs and requirements of the grain industry Motomco's Model 919R Moisture Meter is used universally for the inspection of grain, rice and beans under the United States Department of Agriculture's official standards. Accurate, reliable and built for years of service, it provides the measurements you need regardless of conditions-wet or dry, warm or cold, even newly blended. Its the only tester approved by USDA and FGIS.

The Moisture Meter operates fast, less than one minute per test-with no warm-up period needed. The Test Cell accommodates a full 250 gram sample for maximum accuracy And it pivots for rapid removal of sample material. The electronic meter is the only one equipped with a patented center post to compensate for bushel weight variation, packing and leveling of sample. The Model 919R features precision-built parts, rugged construction and simplicity of electronic circuitry. Battery or line voltages, aging of components and variable climate conditions do not affect the accuracy of measurements. It operates on 110 AC current.

A GREAT PRICE ON THE COMPLETE SYSTEM! $1299.99

ORDER  

LOOKING FOR A PORTABLE SMALL GRAIN SAMPLE THRESHER?

CHECK OUT THE RYDEN REAPER

  • The first stage is a tooth cylinder which breaks the heads into white caps
  • The second stage is a unique (soft rubber disk) threshing chamber, which rolls the seed and peels the hull off, much like the farmer rubs it out in his hand. You can adjust the threshing disk for different sized seeds, close enough to rub out even the small shriveled kernels that usually blow out the back of your combine
  • The fourth and final stage is a sieve, which has the same action and purpose as the sieves on a combine

TIME is your most precious commodity. Many hours are wasted every year at harvest, driving an expensive combine (up to $100 an hour to operate) to test grain samples for moisture. That's what prompted the development of the Ryden portable thresher. No more wasted time driving a combine for miles to take moisture samples, or ending up with 5 to 10 bushels of wet grain to handle.

The Ryden Reaper offers you a choice of hand or electric operation. This allows you to option to thresh your sample by turning a hand crank, or by plugging the unit into your vehicle's cigarette lighter and threshing it electrically.

The threshing method is a 4-step process, giving you a sample as clean as your combine, or better.

VALUE PRICED 

 

"Why drive your combine down the road when you can take your pick-up. Save five hours of combine

ORDER  

LIGHTWEIGHT, SELF PRIMING PUMP THAT FLOATS!

THE WATERMASTER®
- Handles Drainage, Irrigation and Flood Emergencies!

Just set it in the water and start it up. The 5hp motor delivers over 40,000 gallons per hour! It will fill your 3,000 gallon water tank in less than five minutes. The large inlets and specially designed impeller allows the pump to easily handle almost any liquid from water to sludge. Drain your sloughs and potholes and put that productive land to work for you! So lightweight, you can carry it anywhere.

Package includes:

  • Pump with 5hp engine
  • 400' x 6" hose
  • "O" ring and 1 roll of patching tape

CALL FOR PRICE 

 

 

A Screw on gear
B Complete drive in one assembly
C Big 6" discharge outlet with snap fit hose connections
D Thrust ball bearings rated at over 10,000 hours service
E Unbreakable urethane impeller
F Tough reinforced fiberglass body
G Over 79 one-inch screen openings
H Extra large bronze bearings guide mainshaft top and bottom
I Urethane floatation foam

 

ORDER  

 

ELIMINATE THE ANNOYANCE AND INCONVENIENCE OF A BLOCKED BIN DISCHARGE WELL

BROCK'S WELL-GARD®

WELL-GARD is an innovative, simple and inexpensive solution to a sometimes serious and always annoying grain handling problem. It's designed to insure a continuous flow of grain out of your bin-even grain containing frozen or compacted chunks.

WELL-GARD limits the bridging and blockage caused by these clumps of grain. Its tenacious series of knives cut up or break up chunks threatening to block your bin's discharge well. It's round guard is engineered to stop chunks that will not break up, allowing grain to continue flowing around the lump and into the well. It automatically moves uncooperative hunks down and away from the well opening. Made of sturdy galvanized, welded steel for a long, rust-resistant life, WELL-GARD measures a tiny 12 inches high and 181/2 inches in diameter. But it does a giant-size job in smoothing out your operations.

AN UNBEATABLE VALUE 

COMMERCIAL MODEL AVAILABLE